You are the network administrator at Ranet, and have to config the routers both Ranet-HQ and Ranet-BR to make the connection throughout Ranet network and with the Internet.
So all you have to do are:
(Config via console of each router.)
1. Enable and set IP address on LAN interface of each router to be the last assignable IP of each subnet.
2. Enable serial interface on each router and set IP address on each interface as:
- s0/0/0 on Ranet-BR: last IP of 5.88.192.56/29
- s0/0/0 on Ranet-HQ: first IP of 5.88.192.56/29
- s0/1/0 on Ranet-HQ: last IP of 5.88.192.224/30
all serial interface use HDLC as encapsulation protocol and do not forget to set clock rate at 64 kbps on Ranet-BR side.
3. Set EIGRP as routing protocol on each router to let Host1 connect to Host2 in the condition that:
- Use AS no.10110
- Not permit EIGRP on interface that is not within Ranet Network.
4. Set default route on each router to let both Host1and Host2 be able to connect to the Online Server
(177.87.0.39) in the internet.
Solution:
Ranet-HQ config:
(copy & paste these commands to Ranet-HQ router)
enconf tint fa0/0no ship add 5.88.192.54 255.255.255.248int s0/0/0no ship add 5.88.192.57 255.255.255.248int s0/1/0no ship add 5.88.192.226 255.255.255.252exit
router eigrp 10110network 5.88.192.48 0.0.0.7network 5.88.192.56 0.0.0.7no auto-summaryexitip route 0.0.0.0 0.0.0.0 se0/1/0
Ranet-HQ#sh ip protocol
Routing Protocol is “eigrp 10110 ”
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 10110
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
5.88.192.48/29
5.88.192.56/29
Routing Information Sources:
Gateway Distance Last Update
Distance: internal 90 external 170
Ranet-HQ#copy run start
Destination filename [startup-config]?
Building configuration…
[OK]
Ranet-HQ#
Ranet-BR config:
(copy & paste these commands to Ranet-BR router)
enconf tint fa0/0no shutip add 5.88.192.46 255.255.255.240int s0/0/0no shclock rate 64000ip add 5.88.192.62 255.255.255.248exit
router eigrp 10110network 5.88.192.32 0.0.0.15network 5.88.192.56 0.0.0.7no auto-summaryexitip route 0.0.0.0 0.0.0.0 se0/0/0
Ranet-BR#sh ip protocol
Routing Protocol is “eigrp 10110 ”
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 10110
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
5.88.192.32/28
5.88.192.56/30
Routing Information Sources:
Gateway Distance Last Update
5.88.192.57 90 497401
Distance: internal 90 external 170
Ranet-BR#sh ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area
* – candidate default, U – per-user static route, o – ODR
P – periodic downloaded static route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
5.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C 5.88.192.32/28 is directly connected, FastEthernet0/0
D 5.88.192.48/29 [90/20514560] via 5.88.192.57, 00:00:53, Serial0/0/0
C 5.88.192.56/29 is directly connected, Serial0/0/0
S* 0.0.0.0/0 is directly connected, Serial0/0/0
Ranet-BR#copy run start
Destination filename [startup-config]?
Building configuration…
[OK]
Ranet-BR#
———————– The End ———————
Everything is OK.
Blogger Comment
Facebook Comment