Powered by Blogger.

How To Install & Configure Zimbra High Availability (HA)

For the Linux systems, i am using CentOS 6 64 Bit. For easy understanding, this is my information system
# Server 1 
Hostname : node1 
Domain : imanudin.net 
IP Address : 192.168.80.91 
 # Server 2 
Hostname : node2 
Domain : imanudin.net 
IP Address : 192.168.80.92 
 # Alias 
IP Hostname : mail 
Domain : imanudin.net 
IP Address : 192.168.80.93 


Alias IP will be used for access clients/users. This alias IP will be configured online failover

# install Zimbra on CentOS 6 on all nodes (node1 and node2) as described at this link : How To Install Zimbra 8.6 on CentOS 6. Please note some information below

– Please change name of each nodes refers into mail.imanudin.net when installing Zimbra

– Set IP address of each nodes refers into mail.imanudin.net include DNS and /etc/hosts

# Stop Zimbra and DNS services on all nodes (node1 and node2)
1.su - zimbra -c "zmcontrol stop"
2.service named stop
3.chkconfig zimbra off
4.chkconfig named off

# After installed Zimbra, install and configure Heartbeat on all nodes (node1 and node2) as described at this link : How To Configure Online Failover/Failback on CentOS 6 Using Heartbeat

# After installed Heartbeat and online failover/failback working fine, then install DRBD for data replication on all nodes (node1 and node2) as described at this link : How To Configure Data Replication/Synchronize on CentOS 6 Using DRBD

# Testing data replication DRBD that has been worked : Testing Data Replication/Synchronize on DRBD

# After DRBD has been worked, copy file/folder /opt/zimbra into DRBD devices.

Do the following command only at node1

– Rysnc Zimbra
1.drbdadm primary r0
2.mount /dev/drbd0 /mnt/tmp
3.rsync -avP --exclude=data.mdb /opt/ /mnt/tmp

data.mdb will be huge if copied by rsync so that take a long time. For the tricks, use cp for copy data.mdb to DRBD devices 

– Copy data.mdb
1.cp /opt/zimbra/data/ldap/mdb/db/data.mdb /mnt/tmp/zimbra/data/ldap/mdb/db/data.mdb
2.chown zimbra.zimbra /mnt/tmp/zimbra/data/ldap/mdb/db/data.mdb

# Umount DRBD devices after rsync file/folder Zimbra at node1
1.umount /dev/drbd0

# Move folder /opt existing to another folder, do the following command on all nodes (node1 and node2)

1.mv /opt /backup­opt
2.mkdir /opt

# Configure /etc/hosts and dns records on all nodes (node1 and node2)
1.vi /etc/hosts

so that like below127.0.0.1 localhost 192.168.80.91 node1.imanudin.net node1 192.168.80.92 node2.imanudin.net node2 192.168.80.93 mail.imanudin.net mail

1.vi /var/named/db.imanudin.net

change IP address of mail so that refers into IP 192.168.80.93. See the following example$TTL 1D @ IN SOA ns1.imanudin.net. root.imanudin.net. ( 0 ; serial 1D ; refresh 1H ; retry 1W ; expire 3H ) ; minimum @ IN NS ns1.imanudin.net. @ IN MX 0 mail.imanudin.net. ns1 IN A 192.168.80.91 mail IN A 192.168.80.93


# Configure file /etc/ha.d/haresources on all nodes (node1 and node2)
1.vi /etc/ha.d/haresources

so that like belownode1.imanudin.net IPaddr::192.168.80.93/24/eth0:0 drbddisk::r0 Filesystem::/dev/drbd0::/opt::ext3 named zimbra 


# Stop service Heartbeat on node2 and then node1
1.service heartbeat stop

# Start service Heartbeat on node1 and then node2
1.service heartbeat start

TESTING HA

– Failover

After Zimbra running well on node1, please stop service Heartbeat on node1 or force off machine
1.service heartbeat stop

All services that taken over by Heartbeat will automatically stopped and taken over by node2. How long node2 can start all services worked again, depends how long start services (named and zimbra)

– Failback

Please start again service Heartbeat on node1 or power on machine
1.service heartbeat start

All running services on node2 will automatically stopped and taken over by node1

Hooray, finally you could build Zimbra HA with DRBD+Heartbeat

For log information about HA process, you can see at /var/log/ha-log

Good luck and hopefully useful 
    Blogger Comment
    Facebook Comment